Picture showing the limestone cleaning in West Byfleet by cleaning work by Fabritec, Tile Cleaning Surrey

Limestone Cleaning West Byfleet

Presenting Incredible Limestone Cleaning West Byfleet

  • You have been in the proper place if you are looking for Limestone cleaning.
  • Our specialists in New Malden have now been cleaning Limestone floors in the West Byfleet area for over two decades..
  • Our trusted consultants in New Malden are here to assist you with the travertine cleaning, ensure you get your quote now.

Just How Do We Go About Cleaning Your Limestone Floors In West Byfleet

  • Specailists begin by applying a Limestone cleaner and degreaser on the floor. The cleaner should be left to work for around twenty minutes to allow it to break-down the grease laden. They also use scrubbing machines to scrub the cleaning solutions into the surface of the Limestone.
  • After the scrubbing has finished, they rinse and vacuum away the slurry and check out the condition of the Limestone. We keep scrubbing and rinsing until it has released all of the soil it can. With honed and polished Limestone, one scrubing step is usually sufficient to take off any ingrained dirt. Having said that, with Tumbled Limestone and Brushed Limestone tiles, the cleaning may require to be repeated several times.
  • After machine scrubbing, there can still be trapped soil in the surface of Tumbled and Brushed Limestone, and in the grout.
  • If there is still embedded dirt after scrubbing, we can make use of hot pressure rinsing machines. Hot pressure rinsing drives hot water deep within the pores and holes in the tiles and the grout, to access the dirt that the floor scruber could not remove. It's frequently surprising how more dirt the pressure rinsing process removes.
  • pressurised rinsing may possibly not be suitable for soft or very porous Limestone, as it can create a shadow effect from the cleaning.
limestone cleaning work West Byfleet by Tile Cleaning Surrey

How Is Limestone Polished?

Polishing Limestone is needed if the initial shine has worn away from a polished Limestone through wear and other damage.

Limestone polishing starts using diamond honing tools to get rid of the surface defects to prepare the floor for diamond polishing.

Fine diamond tooling generates a honed gloss. If you prefer a gloss finish, after diamond polishing, we use Limestone polishing powders to give the Limestone a high polished sparkle.

Scrubbing terracotta floors in West Byfleet by Tile Cleaning Surrey

How We Restore Limestone Floors

Limestone restoration begins by examining the floor for any damage. Typically the use of strong detergents and also foot traffic damages the finish on Limestone.

The result is a scored, permeable finish with tiny, holes that attract soil. When this happens, the initial surface is removed by grinding and also then honing.

This process is called floor restoration. We use a variety of Limestone floor restoration products like; diamonds for grinding and honing, resin fillers, grouts and polishing powders to generate a gloss finish.

The wear over older Limestone floors is a result of many years, perhaps decades, of footfall. Laminations within the stone can splinter, slabs can crack, and the linestone subfloor might move.

The wear is also a reminder of the floor's history, it is therefore often better to accept these imperfections rather than disrupt an old floor. Most of the time, these vintage floors are installed in listed buildings and any work is strictly regulated by the Heritage authorities.

Limestone restoration work in West Byfleet

Call Now for a Free No-Obligation Quotation.

We are trusted by 100's of clients in Surrey.

Discover additional stone floor cleaning and polishing solutions we provide in West Byfleet , click on the stone link.

Marble Travertine Terrazzo Slate Sandstone Granite Victorian Tiles Terracotta Quarry Tiles Porcelain Tile & Grout

Limestone Sealing In West Byfleet

Limestone sealing begins with evaluating the kind of Limestone and also the condition with the floor base.

Sealing A Limestone Floor Without A Damp Proof Membrane Layer

Limestone has been used as for thousands of years. Buildings before the 1950s can have their stone floors laid straight onto compact soil, chalk or lime-based mortar.

These floors need to enable the movement of moisture through the sub-floor, which has an effect on the choice for a sealer.

These kinds of floors should be sealed with an impregnating sealer to maintain the movement of moisture.

Limestone sealing services in West Byfleet

Applying A Sealer To Polished Limestone

To retain the natural finish of polished Limestone, an impregnating sealer is generally applied. 1 or 2 coats of impregnating sealer is usually enough to stop water penetrating into the stone. There isn't a lot of sealer a polished Limestone, therefore the sealer should be topped up every year. Acid spills go through an impregnating sealer, leaving an etch mark. {Which means acid spills for example [xfield_acid-spills] will penetrate the impregnating sealer on the Limestone floor, leaving a dull etch mark.} If there is a storing dye into the liquid you spill on your own Limestone, e.g. red wine, the etch mark is likewise stained with the colour of the spill.

Sealing Honed Limestone Tiles

Limestone tiles with a honed finish will have a matt or sheen finish. Stone is much more porous than a polished Limestone, but less permeable than tumbled Limestone. If you prefer a natural matt-look, an impregnating sealer retains the original finish. As with polished Limestone, an impregnating sealer will not stop acid etching.

Honed Limestone can have a film-forming or surface sealer. As the name of the sealer implies, the sealer forms a protective film on top top of the tiles. The protectoive film provides extra protection from damage from etching. The film acts as a sacrificial wear surface, taking the damage from foot traffic Because opposed to the tile itself. As the sealer is the top of the Limestone, we recommend applying an impregnating sealer first. The impregnating sealer helps protect the stone in areas where the surface film wears .

A surface sealer lasts for 2 to 4 years before it requires to be re-applied. We suggest checking wear areas every 6 months to check for wear. If a place is showing wear, clean areas to take out any surface soil, then top the area up using one or two layers of new surfcae sealer.

Using this method, a Limesone protective sealer can last for years and years, without struggling with an unsightly build-up of protective sealer in areas that don’t need any more sealer.

Some Of The Places Near West Byfleet we serve:

: