Complete Stone Tile Care Across Wandsworth!

Bit by bit Limestone will loose the original finish. This damage to the surface is caused by traffic scores and etch marks Limestone Polishing is the best way to restore the initial finish. We utilise industrial-grade equipment and diamond tooling to grind and polish the stone.

Almost all Limestone surfaces are not even due to the fact tiles are not set level. A Limestone floor is smoothed by grinding off the lippage and jagged edges of the tiles. This is a complicated process but the results are gorgeous. The Limestone floor will get the look of looking like just one area of stone.

After grinding, the grout sits will sit at the same level as the Limestone tiles. Cleaning a ground and polished Limestone floor is much like cleaning just one slab of glass. There will be no uneven grout lines to trap soil. Holes, chips and crack repairs tend to be an element of the restoration procedure. The restoration needed should be dependant on the condition of of your Limestone floor.

Discover moreabout our Limestone cleaning Wandsworth services plus our entire stone floor cleaning restoration options or Book your free Quote

Slate is a wonderfully adaptable flooring which can be finished using a number of finishes including rough texture, smooth honed or polished surface. Cleft slate will get an accumulation of dirt inside the crevices that is hard to get rid of.

There are specialist machinery and products to remove the soil and old sealers, restoring the initial slate finish. When the professional cleaning is complete , we leave the floor to dry, then put on a long-lasting, easy to maintain sealer.

If you have the right slate, it may be ground smooth, which makes it better to clean.

Find out about our Slate cleaning and sealing Wandsworth work along with our wide-ranging stone cleaning  services or Book a Quote

Many Victorian and Edwardian hallways could have floors produced from Geometric Encaustic tiles.

The foremost attributes of Victorian tiles are the natural clay colours and a matt finish.

A large number of these floors were sealed and then covered up with carpet or lino.

Old paint spills, waxes, polishes and sealer residues helps make cleaning these types of floors a challenge.

After cleaning, the original colours in the tiles can appear washed-out, so we put on a colour intensifying sealer to restore the original . The mat finish may be polished by applying a wax or topical sealer.

Discover moreabout our Victorian Minton Tiles cleaning and sealing Wandsworth work including our comprehensive professional cleaningoptions or Book a Quote

Porcelain is classified as a ceramic, but manufactured with alternative materials than traditional ceramic tiles.

Porcelain is extremely resistant to moisture, and so spillages should not pnetrate into the tile and result in stains.

If Porcelain is not correctly made, the top can absorb soil just like natural stone floors. It may be hard to remove this soil.

We are able to get rid of embedded soil with equipment built to go into the microscopic pits where the soil is held.

We will help minimize the dirt using Porcelain sealers.

If you have got a solid colour Porcelain, we are able to re-surface the tiles by Grinding and re-polishing.

Get more information about our Porcelain Tiles Cleaning Wandsworth floor restoration services along with our wide-ranging professional cleaning options or Book a Quote.

Natural tone floor cleaning is hardly ever just cleaning, there is certainly regularly more restoration needed. Restoring stone and tile floors in most cases involves many stages. Stone and tile floors have problems with foot traffic wear and damage, because people walk over them. The most common issue we encounter during stone restoration is greasy dirt scuffed in to the surface creating a worn, unpleasant appearance. Highly polished floors like Stone, Granite and Terrazzo reveal surface damage more rapidly while the shiny finish goes dull from traffic scratches. A surface sealer does not prevent porous stone and tiles like Limestone, Sandstone and Terracotta eventually suffering from wear and spill damage.

Grout is normally probably the most vulnerable part of a tile installation. As it is a little deep-set, which means that the grout draws in more soil than the natural stone itself. Holes may be filled and cracks repaired included in a restoration.

We use resurfacing to take away surface damage caused by etch marks and scratch damage.The good thing about natural stone is the fact that it can be resurfaced, to reveal a new fresh finish.