Stone Tile Cleaning & Restoration Stanwell Moor

An initial shine on Limestone tiles will gradually loose its shine. Scratching and etching build and remove the original surface. Before long, the tiles will have to be polished. We use diamonds to eliminate the dmaage and marks and bring back the original shine.

If your floor happens to be laid with jagged tiles, this might be referred to as lippage. The only method to make a Limestone floor flat is by grinding off the lippage and jagged edges of the tiles. You need specialized equipment and years of experience to grind and hone a Limestone floor, however the final result is gorgeous. The floor will look like a single area of Limestone.

Following grinding, the Limestone tiles will sit at the same level the grout. Cleaning a ground, honed and polished Limestone floor is similar to cleaning just one piece of glass. There are no grout lines to retain soil. Cracks, chips and hole repairs are often an element of the restoration procedure. The restoration needed will be based on the current state of the floor.

Find out moreabout our Limestone cleaning Stanwell Moor work as well as our substantial stone floor cleaning restoration systems or Book your free Quote

Slate is a tremendously popular floor and wall tile due to its low porosity and the numerous textures and varieties of Slate available. Riven slate can get an accumulation of soil in the crevices this is certainly difficult to get rid of.

There are specialist machinery and products to eliminate the soil and old sealers, restoring the original slate finish. Then we use hard-wearing sealers.

If you want a smooth floor, we can grind the ground, subject to the slate being ideal for grinding.

Get more information about our Slate cleaning and sealing Stanwell Moor service and also our comprehensive stone cleaning  service or Book a Quote

Victorian Clay or Minton geometric tiles are installed in Victorian and Edwardian Hallways.

The tiles have a matt finish to get their colour through the clay used in their manufacture.

Due to how old they are, these floors have had a lot of wear and can have layers of various sealers.

Owing to their age, these floors might have a range of coating residues, that need to have expert cleaning

A colour intensifying sealer is applied after cleaning, to restore the original colours into the tiles. If you prefer a sheen or gloss finish a topical sealer or wax may be used.

Learn moreabout our Victorian Minton Tiles cleaning and sealing Stanwell Moor work and our wide-ranging professional cleaningsolutions or Book a Quote

Porcelain is a ceramic mixture with additional sand and feldspar added to develop a denser tile.

High quality Porcelain has really low porosity, this means less stains, less water damage, much less need for sealing.

Some inferior porcelain has microscopic holes that will absorb soil just like natural stone floors. It could be tough to remove this soil.

We possess the equipment and experience to eliminate this hard to reach soil.

When your porcelain floor is clean we are able to use a sealer which protects against day to day spillages.

If you have a trough-colour Porcelain, we could re-surface the tiles by Grinding and re-polishing.

Find out about our Porcelain Tiles Cleaning Stanwell Moor floor restoration services as well as our wide-ranging professional cleaning solutions or Book a Quote.

Natural tone floor cleaning is hardly ever just cleaning, there is certainly frequently more restoration required. Natural stone floor restoration usually takes many techniques. Natural stone floors have problems with foot traffic wear and damage, because individuals move on them. The most frequent problem we confront during stone restoration is fatty grime scuffed to the surface producing a lifeless, dreadful finish. Highly polished floors like Stone, Granite and Terrazzo reveal surface damage much faster once the shiny finish dulls from traffic marks. A surface sealer will not avoid permeable stone and tiles like Sandstone, Limestone and Terracotta eventually struggling with wear and spill damage.

Most stone and tile flooring has cement grout. Cementatious grout is softer than natural stone stone and tile and more vulnerable to abrasion and chemical damage. Cracks, chips and hole repairs are often a part of the restoration work.

Etching and scratches are generally removed by grinding and honing.The good thing about natural stone is the fact that it could be re-surfaced, to reveal a brand new finish.