Stone Tile Cleaning & Restoration Shackleford

The original finish on Limestone tiles will gradually go dull. Scratches and spill damage build and remove the original finish. Gradually, your Limestone will need to be repolished. We use industrial diamond polishing to re-surface the tiles and repair the initial surface.

The majority of Limestone tile surfaces are not even as the tiles are not laid flat. The only method to make a Limestone tile floor smooth is by grinding off the lippage and jagged tile edges. Limestone tile grinding is a specialist service, that gives superb results. The Limestone floor will have the appearance of appearing as a single area of stone.

Following grinding, the tiles and grout will be at the exact same level. After grinding honing and polishing mopping is a breeze, because the mop slides over the floor. There will be no grout channels to capture soil. Limestone restoration commonly includes a few chip and crack repairs, using resin fillers. We will recommend the correct restoration service.

Discover moreabout our Limestone cleaning Shackleford service as well as our substantial stone floor cleaning restoration options or Book your free Quote

Slate is a remarkably flexible flooring that can be finished using a range of finishes from rough surface, smooth honed or polished finish. Whilst slate has a low porosity, it's going to always to some extent absorb and oil based spills, making frustrating marks.

We use rotary scrubbing appliances and sealer removers clean the slate. After professional cleaning we apply durable sealers.

Some slate floors can be ground to a smooth finish.

Discover more about our Slate cleaning and sealing Shackleford services along with our comprehensive stone cleaning  work or Book a Quote

Period Geometric or Encaustic floor tiles are installed in Victorian and Edwardian hallways.

The tiles have a matt finish and get their colour through the clay used in their manufacture.

A good deal of these floors were initially sealed and then covered with carpet and lino.

The main concerns with victorian floor tiles is to remove several of oils, polishes, dirt, waxes and grime without damaging the floor tiles.

A colour intensifying sealer is applied immediately after cleaning, to bring back the first colours when you look at the tiles. If you like a sheen or gloss finish a surface sealer or wax can be put on.

Discover moreabout our Victorian Minton Tiles cleaning and sealing Shackleford service in addition to our wide-ranging professional cleaningservices or Book a Quote

Porcelain has become an increasingly fashionable alternative to traditional ceramic tiles and natural stone.

This helps make Porcelain a lot more stain resistant and easier to maintain than traditional ceramic tiles.

There are substandard porcelains that will absorb surface soil and spills similar to natural stone floors. This soil could be tough to remove.

We know how to get rid of embedded soil using equipment built to get into the microscopic pits where the soil is held.

Our Porcelain sealers will help stop further soil problems.

If you have a solid colour Porcelain, we are able to re-surface the tiles by Grinding and re-polishing.

Find out more about our Porcelain Tiles Cleaning Shackleford floor restoration work including our extensive professional cleaning solutions or Book a Quote.

Natural stone floor cleaning very often will incorporate further restoration services. Restoring stone and tile floors normally involves numerous stages. Stone floors suffer from traffic wear and damage, because individuals move over them. In most cases, dirt, stains and foot traffic scuff marks harm the floor finish, subsequently the importance of stone restoration. A polished granite or Stone floor wears faster because traffic wear that will begin to wear he finish and weaken the sparkle. Traffic problems eventually has an effect on porous stones including Terracotta, Sandstone, Limestone and, Travertine, which are most often protected with a surface sealer.

Most natural stone and tile floors have cement grout. As it is a little deep-set, hence the grout traps more grime compared to the natural stone itself. Cracks, chips and hole repairs will often be part of the restoration work.

We use resurfacing to eliminate stone finish damage caused by acid etching and scratches.Natural stone has the advantage that a dirty, porous surface can be removed, unveiling an attractive new surface.