Stone Tile Cleaning & Restoration Collier's Wood

An original surface on a Limestone floor will slowly dull. The dull appearance is due to tiny scratches on the surface of the stone where it is often walked over. Limestone Polishing is the best way to revive the original appearance. We use industrial diamond polishing equipment to bring back the initial shine.

If your floor has been laid with not level tiles, this really is referred to as “lippage”. A Limestone tile floor can be leveled by grinding away the lippage and uneven edges of the tiles. Limestone tile grinding is a professional service, providing stunning results. The Limestone floor will have a monolithic appearance as an individual slab of stone.

After grinding, the Limestone will be flush with the grout lines. After grinding honing and polishing Limestone maintenance is a piece of cake, as the mop slides over the floor. There are no uneven grout lines to trap soil. Limestone floor restoration commonly involves a few crack and chip repairs, using Limestone fillers. After inspecting the Limestone floor, we will advise the very best Limestone restoration process.

Find outabout our Limestone cleaning Collier's Wood services in addition to our wide-ranging stone floor cleaning restoration work or Book your free Quote

Slate is a really popular floor and wall tile due to its low porosity and the many textures and varieties of Slate available. Riven slate can get an accumulation of dirt inside the crevices this is certainly hard to get rid of.

We use a combination of machine scrubbing and hand scrubbing to eliminate all traces of old dirty sealers and clean the slate. When our professional cleaning is finished, then use professional sealers that will last for decades not just months.

If you prefer a smooth finish, we could grind the floor, but we have to gauge the slate before grinding.

Find out more about our Slate cleaning and sealing Collier's Wood service along with our extensive stone cleaning  treatments or Book a Quote

Victorian Clay Tiles are installed in many Victorian and Edwardian hallways.

The tiles are unglazed from the natural colours from the clay used to make them.

Lots of these floors were initially sealed and then covered up with carpet or lino.

Old paint spills, waxes, polishes and sealer deposits helps make cleaning these types of floors challenging.

After cleaning, a colour intensifying sealer is used to revive the natural colours in the tiles. If you want a sheen or gloss finish a topical sealer or wax may be used.

Find out moreabout our Victorian Minton Tiles cleaning and sealing Collier's Wood services along with our wide-ranging professional cleaningtreatments or Book a Quote

Porcelain is a type of ceramic tile.

Top quality Porcelain has really low porosity, this means less stains, less water damage, and less need to be sealed.

Inferior porcelains have tiny holes that will absorb soil similar to natural stone floors. If you've got a substandard Porcelain, the surface soil may be difficult to remove.

We are able to remove ingrained dirt using equipment built to get into the microscopic pits holding the soil.

After cleaning, we apply specific Porcelain sealers to avoid this problem.

Solid colour Porcelain Tiles can also be ground and polished, the same as Granite or Stone.

Discover more about our Porcelain Tiles Cleaning Collier's Wood floor restoration service in addition to our comprehensive professional cleaning systems or Book a Quote.

Natural stone cleaning very often includes additional restoration services. Restoring stone and tile commonly involves many methods. natural stone and tile floors suffer from traffic wear and damage, because individuals wander on them. In many cases, dirt, spots and foot traffic scratches spoil the floor finish, consequently the need to have stone restoration. Highly polished floors like granite, Stone and terrazzo show surface damage more rapidly once the polished finish dulls from foot traffic scratches. Porous tile and stone sealed with a film-forming surface sealer will eventually sustain scratch damage.

Grout can be the most sensitive element of a stone or tile installation. Cement grout is softer than stone and much more vulnerable to abrasive and chemical based deterioration. Cracks, chips and hole repairs are often a part of the restoration process.

Acid etching and scratches can be taken away by grinding and honing.We're able to take away the existing surface from the natural stone, uncovering a new sparkling finish.