Find Stone and Tile Cleaning Company in Merton

With time, Limestone will be dull and loose its polish. Surface scratches and stains build and remove the original shine. Before long, the Limestone will have to be repolished. Diamonds are used to remove the marks and scratches and repair the initial gloss.

If your floor has been put down with not level tiles, it is referred to as “lippage”. A Limestone floor can be leveled by grinding off the lippage and uneven tile edges. That is a complicated process however the results are stunning. The Limestone floor will have a monolithic appearance as a single piece of Limestone.

Following grinding, the grout sits will sit at the same level as the Limestone tiles. It is a lot easier to clean a smooth floor than a bumpy floor. Also, soil does not get stuck within the grout lines. If your Limestone floor has chips and cracks, we could repair the damage with resin fillers, closely colour matched with the Limestone. The particular restoration needed is going to be dependant on the condition of of the Limestone floor.

Find outabout our Limestone cleaning Merton service including our extensive stone floor cleaning restoration service or Book your free Quote

Slate is a tremendously popular floor and wall tile due to its low porosity and the many varieties and textures of Slate available. Whilst slate has a low porosity, it's going to always to some extent absorb and oil based spills, making aggravating marks.

We use specialist sealer removers and rotary scrubbing machines to get rid of the layers of old sealer. Once the professional cleaning is complete, then use specialised sealers that last for a long time not months.

Some slate floors can be ground to a smooth finish.

Get more information about our Slate cleaning and sealing Merton services and also our comprehensive stone cleaning  options or Book a Quote

Victorian Clay or Minton geometric floor tiles are installed in Victorian and Edwardian Hallways.

The tiles have a matt finish and obtain their colour from the clay utilized in their manufacture.

Because of their age, these floors have had a lot of wear and can have layers of various sealers.

The main concerns with victorian floor tiles is to remove the of polished, oils, dirt, waxes and grime whilst not harming the tiles.

After cleaning, the initial colours of the floor tiles can look washed out, therefore we use a colour intensifying sealer to bring back the initial . If you prefer a sheen or gloss finish a topical sealer or wax can be put on.

Learn moreabout our Victorian Minton Tiles cleaning and sealing Merton work in addition to our substantial professional cleaningwork or Book a Quote

Porcelain is categorised as a ceramic, but manufactured with different ingredients to standard ceramic tiles.

This helps make Porcelain much more stain resistant and simpler to maintain than standard ceramic tiles.

If Porcelain is not made properly, the surface can absorb soil just like natural stone floors. This soil may be difficult to remove.

We are able to remove ingrained soil using equipment made to go into the microscopic pits holding the soil.

Once your porcelain floor is clean we are able to apply a sealer which protects against everyday soil and spills.

If you have a trough-colour Porcelain, we could re-surface the tiles by Grinding and re-polishing.

Get more information about our Porcelain Tiles Cleaning Merton floor restoration services and our extensive professional cleaning services or Book a Quote.

Natural tone cleaning is seldom just cleaning, there is often additional restoration required. Restoring stone and tile floors in most cases involves several methods. At the very least, all stone floors bear some kind of basic deterioration. Traffic wear and tear, spills and surface problems shows up on the majority of stone and tile floors, spoiling the finish, making the floor appear flat and unappealing, consequently the significance of stone restoration. Polished Stone tiles and granite floors exhibit wear and tear rapidly, as little foot traffic scuff marks on the surface change the gloss and hold dirt. Wear problems sooner or later affects porous stones like Limestone, Travertine, Sandstone & Terracotta, which are most often protected with a surface sealer.

Most stone flooring have grout lines. As it is slightly recessed, so the grout draws in more dirt than the natural stone itself. Cracks, chips and hole repairs are often part of the restoration process.

We get rid of etching and scratches by grinding and honing.You can take away the old surface from the stone, showing a brand new clean surface.